Backup Power You Can Count On
Power outages in San Diego County arrive with wildfire-season shutoffs, winter storms, and the occasional grid fault — and they never seem to pick a convenient time. A standby generator bridges that gap automatically, restoring power to the circuits that matter most within seconds of an outage. For homes with medical equipment, home offices, or well pumps, that reliability isn’t a luxury; it’s peace of mind.
Sky Source Electric has installed backup power systems across the county for more than 20 years. As a licensed C-10 contractor, we do far more than set a generator on a pad. We calculate your real load, recommend the right unit and fuel source, install a code-compliant transfer switch, handle the permits, and coordinate the inspection. The result is a system that starts when it should, powers what you need, and does it all safely — without dangerous backfeed to the grid.
Why Install a Standby Generator
Automatic Power
The system senses an outage and restores power to key circuits in seconds.
Home Protection
Keep refrigeration, sump and well pumps, and heating or cooling running.
Safe Connection
A proper transfer switch prevents deadly backfeed to utility lines.
Business Continuity
Keep essential operations online when the grid can’t.
Sized Right, Installed Right
1. Load Analysis
We determine which circuits you need to back up and calculate the required capacity.
2. System Design
We recommend the right generator, fuel source, and transfer switch, with clear pricing.
3. Permitted Install
We set the unit, wire the transfer switch, pull permits, and coordinate inspection.
4. Test & Train
We commission the system, run a live test, and show you exactly how it works.
Complete Generator Systems
- ✔ Whole-home and essential-circuit standby generators
- ✔ Accurate load sizing for your household
- ✔ Automatic and manual transfer switch installation
- ✔ Natural gas and propane fuel connections coordinated
- ✔ Permits, inspection, and safe grid isolation
Generator Installation Across the County
Generator Installation Questions
What size generator do I need?
It depends on the circuits you want to back up. Some homeowners cover only essentials — refrigerator, a few lights, medical devices — while others want whole-home coverage. We run a load calculation and size the unit to match, so you’re not over- or under-powered.
Do I need a transfer switch?
Yes. A transfer switch safely disconnects your home from the grid before the generator powers your circuits. It prevents dangerous backfeed onto utility lines and is required for a safe, code-compliant install. Learn more on our transfer switch page.
Standby generator or battery backup?
Both keep you powered. A generator runs on fuel for extended outages, while battery backup pairs cleanly with solar. We’ll help you weigh runtime, fuel, and budget to choose the right fit.
Do you handle permits and inspection?
We do. We pull the electrical permit, coordinate the fuel connection, and schedule the inspection so your system is fully documented and approved.
Complete Your Backup Plan
Ready for Reliable Backup Power?
Keep your home or business running through the next outage with a properly sized generator from a licensed local team.